 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT Designer's Kit Available Typical Applications The HMC452ST89 / HMC452ST89E is ideal for applications requiring a high dynamic range amplifier: * GSM, GPRS & EDGE * CDMA & W-CDMA * CATV/Cable Modem * Fixed Wireless Features Output IP3: +49 dBm 21 dB Gain @ 400 MHz 9 dB Gain @ 2100 MHz 50% PAE @ +31 dBm Pout +25 dBm CDMA2000 Channel Power @ -45 dBc ACP Included in the HMC-DK002 Designer's Kit Functional Diagram General Description The HMC452ST89 & HMC452ST89E are high dynamic range GaAs InGaP HBT 1 Watt MMIC power amplifiers operating from 0.4 to 2.2 GHz and packaged in industry standard SOT89 packages. Utilizing a minimum number of external components and a single +5V supply, the amplifier output IP3 can be optimized to +45 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The high output IP3 and PAE make the HMC452ST89 & HMC452ST89E ideal power amplifiers for Cellular/ PCS/3G and Fixed Wireless applications. Electrical Specifications, TA = +25C, Vs= +5V [1] Parameter Frequency Range Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Output Power for 1dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) [2] Noise Figure Supply Current (Icq) 42 27 19 Min. Typ. 400 - 410 21 0.012 22 11 30 27 0.02 18 Max. Min. Typ. 450 - 496 20 0.012 16 11 30 27.5 0.02 13.5 Max. Min. Typ. 810 - 960 15.5 0.012 13 14 30.5 28 0.02 7 Max. Min. Typ. Max. Min. Typ. Max. Units MHz dB 0.02 dB / C dB dB dBm 1710 - 1990 9.5 0.012 13 15 31 28.5 0.02 7 2010 - 2170 9 0.012 20 15 31.5 30.5 45 6.5 510 42 30.5 45 7 510 44 31.5 47 6.5 510 45 31.5 48 6.5 510 46 32 49 6.5 510 dBm dBm dB mA [1] Specifications and data reflect HMC452ST89 measured using the respective application circuits for each designated frequency band found herein. Contact the HMC Applications Group for assistance in optimizing performance for your application. [2] Two-tone input power of 0 dBm per tone, 1 MHz spacing. 5 - 274 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 400 MHz 25 20 15 RESPONSE (dB) Gain vs. Temperature @ 400 MHz 24 23 22 21 GAIN (dB) 20 19 18 17 16 15 14 13 12 0.35 +25 C +85 C -40 C 5 AMPLIFIERS - SMT 5 - 275 10 5 0 -5 -10 -15 0.1 S21 S11 S22 0.2 0.3 0.4 0.5 0.6 0.7 0.37 0.39 0.41 0.43 0.45 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature @ 400 MHz 0 -5 RETURN LOSS (dB) Output Return Loss vs. Temperature @ 400 MHz 0 -2 RETURN LOSS (dB) -4 -6 -8 -10 -12 -14 -16 0.35 +25 C +85 C -40 C -10 -15 -20 -25 -30 -35 0.35 +25 C +85 C -40 C 0.37 0.39 0.41 0.43 0.45 0.37 0.39 0.41 0.43 0.45 FREQUENCY (GHz) FREQUENCY (GHz) P1dB vs. Temperature @ 400 MHz 34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 0.35 0.37 0.39 0.41 0.43 0.45 +25 C +85 C -40 C Psat vs. Temperature @ 400 MHz 34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 0.35 0.37 0.39 0.41 0.43 0.45 +25 C +85 C -40 C FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Noise Figure vs. Temperature @ 400 MHz 10 9 8 NOISE FIGURE (dB) 7 6 5 4 +25 C 5 AMPLIFIERS - SMT Output IP3 vs. Temperature @ 400 MHz 50 48 46 44 OIP3 (dBm) 42 40 38 36 34 32 30 0.35 0.37 0.39 0.41 0.43 0.45 +25 C +85 C -40 C 3 2 1 0 0.35 0.37 0.39 +85 C -40 C 0.41 0.43 0.45 FREQUENCY (GHz) FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 400 MHz 0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 0.35 +25 C +85 C -40 C Gain, Power & IP3 vs. Supply Voltage @ 400 MHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 50 45 40 35 30 25 20 15 10 4.5 Gain P1dB Psat OIP3 0.37 0.39 0.41 0.43 0.45 4.75 5 Vs (Vdc) 5.25 5.5 FREQUENCY (GHz) Power Compression @ 400 MHz 55 Pout (dBm), Gain (dB), PAE (%) 50 45 40 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 16 INPUT POWER (dBm) Pout Gain PAE ACPR vs. Supply Voltage @ 400 MHz W-CDMA, 64 DPCH -10 -15 -20 -25 ACPR (dBc) -30 -35 -40 -45 -50 -55 -60 -65 -70 8 10 12 14 16 18 Source ACPR W-CDMA Frequency: 400 MHz Integration BW: 3.84 MHz 64 DPCH 4.5V 5V 5.5V 20 22 24 26 28 Channel Power (dBm) 5 - 276 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 470 MHz 25 20 15 RESPONSE (dB) 10 5 0 -5 -10 -15 -20 0.1 S21 S11 S22 Gain vs. Temperature @ 470 MHz 23 22 21 20 GAIN (dB) 19 18 17 16 15 14 13 +25 C +85 C -40 C 5 AMPLIFIERS - SMT 5 - 277 0.2 0.3 0.4 0.5 0.6 0.7 12 0.43 0.45 0.47 0.49 0.51 0.53 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature @ 470 MHz 0 Output Return Loss vs. Temperature @ 470 MHz 0 -2 -5 RETURN LOSS (dB) RETURN LOSS (dB) -4 -6 -8 -10 -12 -14 -25 0.43 -16 0.43 +25 C +85 C -40 C +25 C +85 C -40 C -10 -15 -20 0.45 0.47 0.49 0.51 0.53 0.45 0.47 0.49 0.51 0.53 FREQUENCY (GHz) FREQUENCY (GHz) P1dB vs. Temperature @ 470 MHz 34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 0.43 0.45 0.47 0.49 0.51 0.53 +25 C +85 C -40 C Psat vs. Temperature @ 470 MHz 34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 0.43 0.45 0.47 0.49 0.51 0.53 +25 C +85 C -40 C FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Noise Figure vs. Temperature @ 470 MHz 10 9 8 NOISE FIGURE (dB) 7 6 5 +25 C 5 AMPLIFIERS - SMT Output IP3 vs. Temperature @ 470 MHz 50 48 46 44 OIP3 (dBm) 42 40 38 36 34 32 30 0.43 0.45 0.47 0.49 0.51 0.53 +25 C +85 C -40 C 4 3 2 1 0 0.43 0.45 0.47 +85 C -40 C 0.49 0.51 0.53 FREQUENCY (GHz) FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 470 MHz 0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 -35 0.2 +25 C +85 C -40 C Gain, Power & IP3 vs. Supply Voltage @ 470 MHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 50 45 40 35 30 25 20 15 10 4.5 Gain P1dB Psat OIP3 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 4.75 5 Vs (Vdc) 5.25 5.5 FREQUENCY (GHz) Power Compression @ 470 MHz 55 Pout (dBm), Gain (dB), PAE (%) 50 45 40 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 16 INPUT POWER (dBm) Pout Gain PAE ACPR vs. Supply Voltage @ 470 MHz W-CDMA, 64 DPCH -10 -15 -20 -25 ACPR (dBc) -30 -35 -40 -45 -50 -55 -60 -65 -70 8 10 12 14 16 18 Source ACPR 4.5V 5V 5.5V W-CDMA Frequency: 470 MHz Integration BW: 3.84 MHz 64 DPCH 20 22 24 26 28 Channel Power (dBm) 5 - 278 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 900 MHz 20 15 10 RESPONSE (dB) Gain vs. Temperature @ 900 MHz 18 17 16 15 GAIN (dB) 5 AMPLIFIERS - SMT 5 - 279 5 0 -5 -10 S21 S11 S22 14 13 +25 C 12 11 10 +85 C -40 C -15 -20 0.4 9 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 8 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Temperature @ 900 MHz 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0.7 Output Return Loss vs. Temperature @ 900 MHz 0 RETURN LOSS (dB) -5 +25 C +85 C -40 C -10 +25 C +85 C -40 C -15 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 -20 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 FREQUENCY (GHz) FREQUENCY (GHz) P1dB vs. Temperature @ 900 MHz 34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 C +85 C -40 C Psat vs. Temperature @ 900 MHz 34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 C +85 C -40 C FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT Output IP3 vs. Temperature @ 900 MHz 50 48 46 44 OIP3 (dBm) 42 40 38 36 34 32 30 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 C +85 C -40 C Noise Figure vs. Temperature @ 900 MHz 10 9 8 NOISE FIGURE (dB) 7 6 5 4 3 2 1 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 C +85 C -40 C FREQUENCY (GHz) FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 900 MHz 0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 0.7 Gain, Power & IP3 vs. Supply Voltage @ 900 MHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 50 45 40 35 30 25 20 15 10 4.5 Gain P1dB Psat OIP3 +25 C +85 C -40 C 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 4.75 5 Vs (Vdc) 5.25 5.5 FREQUENCY (GHz) Power Compression @ 900 MHz 55 Pout (dBm), Gain (dB), PAE (%) 50 45 40 35 30 25 20 15 10 5 0 4 6 8 10 12 14 16 18 20 22 INPUT POWER (dBm) Pout Gain PAE ACPR vs. Supply Voltage @ 910 MHz CDMA IS95, 9 Channels Forward -10 -15 -20 -25 ACPR (dBc) -30 -35 -40 -45 -50 -55 -60 -65 -70 8 10 12 14 16 Source ACPR 4.5V 5V 5.5V CDMA IS95 Frequency: 910 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels 18 20 22 24 26 Channel Power (dBm) 5 - 280 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 1900 MHz 15 10 5 RESPONSE (dB) 0 -5 -10 -15 -20 -25 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) S21 S11 S22 Gain vs. Temperature @ 1900 MHz 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1.7 5 AMPLIFIERS - SMT 5 - 281 GAIN (dB) +25C +85C -40C 1.8 1.9 FREQUENCY (GHz) 2 2.1 Input Return Loss vs. Temperature @ 1900 MHz 0 Output Return Loss vs. Temperature @ 1900 MHz 0 +25 C +85 C -40 C RETURN LOSS (dB) RETURN LOSS (dB) 2 2.1 -5 +25 C +85 C -40 C -5 -10 -10 -15 -15 -20 -20 1.7 1.8 1.9 FREQUENCY (GHz) -25 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1 P1dB vs. Temperature @ 1900 MHz 34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1 +25 C +85 C -40 C Psat vs. Temperature @ 1900 MHz 34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1 +25 C +85 C -40 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Noise Figure vs. Temperature @ 1900 MHz 10 9 8 NOISE FIGURE (dB) 7 6 5 4 +25 C 5 AMPLIFIERS - SMT Output IP3 vs. Temperature @ 1900 MHz 52 50 48 46 OIP3 (dBm) 44 42 40 38 36 34 32 30 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1 +25 C +85 C -40 C 3 2 1 0 1.7 1.8 1.9 +85 C -40 C 2 2.1 FREQUENCY (GHz) Reverse Isolation vs. Temperature @ 1900 MHz 0 Gain, Power & IP3 vs. Supply Voltage @ 1900 MHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 55 50 45 40 35 30 25 20 15 10 5 4.5 4.75 5 Vs (Vdc) 5.25 5.5 Gain P1dB Psat OIP3 -5 ISOLATION (dB) +25 C +85 C -40 C -10 -15 -20 1.7 1.8 1.9 FREQUENCY (GHz) 2 2.1 Power Compression @ 1900 MHz 50 Pout (dBm), Gain (dB), PAE (%) 45 40 35 30 25 20 15 10 5 0 10 12 14 16 18 20 22 24 26 Input Power (dBm) Pout Gain PAE ACPR vs. Supply Voltage @ 1960 MHz CDMA 2000, 9 Channels Forward -30 -35 -40 -45 ACPR (dBc) -50 -55 -60 -65 -70 -75 -80 14 16 18 20 22 24 26 28 Output Channel Power (dBm) CDMA2000 Frequency: 1.96 GHz Integration BW: 1.228 MHz Forward Link, SR1, 9 Channels 4.5V 5V 5.5V 5 - 282 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Broadband Gain & Return Loss @ 2100 MHz 15 10 5 RESPONSE (dB) 0 -5 -10 -15 -20 -25 -30 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) S21 S11 S22 Gain vs. Temperature @ 2100 MHz 12 11 10 9 8 GAIN (dB) 7 6 5 4 3 2 1 0 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 +25 C +85 C -40 C 5 AMPLIFIERS - SMT 5 - 283 Input Return Loss vs. Temperature @ 2100 MHz 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 1.9 Output Return Loss vs. Temperature @ 2100 MHz 0 -5 +25 C +85 C -40 C RETURN LOSS (dB) -10 +25 C +85 C -40 C -15 -20 2 2.1 FREQUENCY (GHz) 2.2 2.3 -25 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 P1dB vs. Temperature @ 2100 MHz 34 33 32 31 P1dB (dBm) 30 29 28 27 26 25 24 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 +25 C +85 C -40 C Psat vs. Temperature @ 2100 MHz 34 33 32 31 Psat (dBm) 30 29 28 27 26 25 24 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 +25 C +85 C -40 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Noise Figure vs. Temperature @ 2100 MHz 10 9 8 NOISE FIGURE (dB) 7 6 5 4 3 2 1 +25 C +85 C -40 C 5 AMPLIFIERS - SMT Output IP3 vs. Temperature @ 2100 MHz 52 50 48 46 OIP3 (dBm) 44 42 40 38 36 34 32 30 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 +25 C +85 C -40 C 0 1.9 2 2.1 FREQUENCY (GHz) 2.2 2.3 Reverse Isolation vs. Temperature @ 2100 MHz 0 Gain, Power & IP3 vs. Supply Voltage @ 2100 MHz GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 55 50 45 40 35 30 25 20 15 10 5 4.5 4.75 5 Vs (Vdc) 5.25 5.5 Gain P1dB Psat OIP3 -5 ISOLATION (dB) +25 C +85 C -40 C -10 -15 -20 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 FREQUENCY (GHz) Power Compression @ 2100 MHz 50 Pout (dBm), Gain (dB), PAE (%) 45 40 35 30 25 20 15 10 5 0 10 12 14 16 18 20 22 24 26 28 Input Power (dBm) Pout Gain PAE ACPR vs. Supply Voltage @ 2140 MHz W-CDMA, 64 DPCH -20 -25 -30 ACPR (dBc) -35 -40 -45 -50 -55 -60 Source ACPR -65 12 14 16 18 20 22 24 26 28 OUTPUT CHANNEL POWER (dBm) 5.5V W-CDMA Frequency: 2.14 GHz Integration BW: 3.84 MHz 64 DPCH 4.5V 5V 5 - 284 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz Power Dissipation 3 Max Pdiss @ +85C Absolute Maximum Ratings Collector Bias Voltage (Vcc) RF Input Power (RFin)(Vs +5.0 Vdc) Junction Temperature Continuous Pdiss (T = 85 C) (derate 41.5 mW/C above 85 C) +6.0 Vdc +31 dBm 150 C 2.7 W 24.1 C/W -65 to +150 C -40 to +85 C Class 1A 5 AMPLIFIERS - SMT 5 - 285 POWER DISSIPATION (W) 2.5 2 1900 MHz Thermal Resistance (junction to ground paddle) Storage Temperature 1.5 2100 MHz Operating Temperature ESD Sensitivity (HBM) 1 0 5 10 15 20 25 INPUT POWER (dBm) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC452ST89 HMC452ST89E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H452 XXXX H452 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT Pin Descriptions Pin Number Function Description This pin is DC coupled. Off chip matching components are required. See Application Circuit herein. RF output and DC Bias input for the output amplifier stage. Off chip matching components are required. See Application Circuit herein. These pins & package bottom must be connected to RF/DC ground. Interface Schematic 1 RFIN 3 RFOUT 2, 4 GND 400 MHz Application Circuit This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. Note: C2 should be placed as close to pins as possible. TL1 Impedance Physical Length Electrical Length 50 Ohm 0.09" 2 TL2 50 Ohm 0.08" 2 TL3 50 Ohm 0.17" 4 TL4 50 Ohm 0.04" 1 TL5 50 Ohm 0.25" 6 Recommended Component Values C1 C2 C3, C4 C5 C6 C7 L1 L2 L3 L4 R1 12 pF 15 pF 6.8 pF 39 pF 100 pF 2.2 F 47 nH 40 nH 4.3 nH 5.1 nH 5.1 Ohm PCB Material: 10 mil Rogers 4350, Er = 3.48 5 - 286 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 400 MHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 110409-400 Item J1 - J2 J3 C1 C2 C3, C4 C5 C6 C7 L1 L2 L3 L4 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 12 pF Capacitor, 0402 Pkg. 15 pF Capacitor, 0402 Pkg. 6.8 pF Capacitor, 0402 Pkg. 39 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 F Capacitor, Tantalum 47 nH Inductor, 0603 Pkg. 40 nH Inductor, 0402 Pkg. 4.3 nH Inductor, 0402 Pkg. 5.1 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC452ST89 / HMC452ST89E Linear Amp 110407 Evaluation PCB, 10 mils [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 287 HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT 470 MHz Application Circuit This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. Note: C2 should be placed as close to pins as possible. TL1 Impedance Physical Length Electrical Length 50 Ohm 0.09" 2.5 TL2 50 Ohm 0.08" 2 TL3 50 Ohm 0.17" 5 TL4 50 Ohm 0.04" 1 TL5 50 Ohm 0.25" 7 Recommended Component Values C1, C2 C3 C4 C5 C6 C7 L1 L2 L3 L4 R1 12 pF 6.8 pF 5.6 pF 39 pF 100 pF 2.2 F 47 nH 40 nH 4.7 nH 3.9 nH 5.1 Ohm PCB Material: 10 mil Rogers 4350, Er = 3.48 5 - 288 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 470 MHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 110416-470 Item J1 - J2 J3 C1, C2 C3 C4 C5 C6 C7 L1 L2 L3 L4 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 12 pF Capacitor, 0402 Pkg. 6.8 pF Capacitor, 0402 Pkg. 5.6 pF Capacitor, 0402 Pkg. 39 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 F Capacitor, Tantalum 47 nH Inductor, 0603 Pkg. 40 nH Inductor, 0402 Pkg. 4.7 nH Inductor, 0402 Pkg. 3.9 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC452ST89 / HMC452ST89E Linear Amp 110407 Evaluation PCB, 10 mils [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 289 HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT 900 MHz Application Circuit This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. Note: C2 should be placed as close to pins as possible. TL1 Impedance Physical Length Electrical Length 50 Ohm 0.21" 11 TL2 50 Ohm 0.13" 7 TL3 50 Ohm 0.38" 20 Recommended Component Values C1 C2 C3 C4 C5 C6 C7 L1 R1 27 pF 6.8 pF 2.2 pF 4.7 pF 5.6 pF 100 pF 2.2 F 20 nH 5.1 Ohm PCB Material: 10 mil Rogers 4350, Er = 3.48 5 - 290 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 900 MHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 110384-900 [1] Item J1 - J2 J3 C1 C2 C3 C4 C5 C6 C7 L1 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 27 pF Capacitor, 0402 Pkg. 6.8 pF Capacitor, 0402 Pkg. 2.2 pF Capacitor, 0402 Pkg. 4.7 pF Capacitor, 0402 Pkg. 5.6 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 F Capacitor, Tantalum 20 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC452ST89 / HMC452ST89E Linear Amp 110382 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 291 HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT 1900 MHz Application Circuit This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. Note: C2 should be placed as close to pins as possible. TL1 Impedance Physical Length Electrical Length 50 Ohm 0.04" 4 TL2 50 Ohm 0.10" 11 Recommended Component Values C1 C2 C3 C4 C5 C6 L1 L2 R1 3 pF 2 pF 3.3 pF 15 pF 100 pF 2.2 F 10 nH 12 nH 5.1 Ohm PCB Material: 10 mil Rogers 4350, Er = 3.48 5 - 292 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 1900 MHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 108712-1900 Item J1 - J2 J3 C1 C2 C3 C4 C5 C6 L1 L2 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 3 pF Capacitor, 0402 Pkg. 2 pF Capacitor, 0402 Pkg. 3.3 pF Capacitor, 0402 Pkg. 15 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 F Capacitor, Tantalum 10 nH Inductor, 0402 Pkg. 12 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC452ST89 / HMC452ST89E Linear Amp 108710 Evaluation PCB, 10 mils [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 293 HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 5 AMPLIFIERS - SMT 2100 MHz Application Circuit This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. TL1 Impedance Physical Length Electrical Length 50 Ohm 0.04" 5 TL2 50 Ohm 0.04" 5 Recommended Component Values C1 C2 C3 C4 C5 C6 L1 L2 R1 3 pF 2 pF 3.3 pF 15 pF 100 pF 2.2 F 12 nH 10 nH 5.1 Ohm PCB Material: 10 mil Rogers 4350, Er = 3.48 5 - 294 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC452ST89 / 452ST89E v01.0205 InGaP HBT 1 WATT POWER AMPLIFIER, 0.4 - 2.2 GHz 2100 MHz Evaluation PCB 5 AMPLIFIERS - SMT List of Materials for Evaluation PCB 109824-2100 [1] Item J1 - J2 J3 C1 C2 C3 C4 C5 C6 L1 L2 R1 U1 PCB [2] Description PCB Mount SMA Connector 2 mm DC Header 3 pF Capacitor, 0402 Pkg. 2 pF Capacitor, 0402 Pkg. 3.3 pF Capacitor, 0402 Pkg. 15 pF Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 2.2 F Capacitor, Tantalum 12 nH Inductor, 0402 Pkg. 10 nH Inductor, 0402 Pkg. 5.1 Ohm Resistor, 0402 Pkg. HMC452ST89 / HMC452ST89E Linear Amp 109822 Evaluation PCB, 10 mils The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350, Er = 3.48 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 295 |
Price & Availability of HMC452ST89
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |